[GI] G-Champion Designs Are Not G-Champion(3D)

Discussion in 'General Archive' started by †βŁΔÇЌ†ĐΣǍŦĦ†NWO, Mar 31, 2020.

Dear forum reader,

if you’d like to actively participate on the forum by joining discussions or starting your own threads or topics, please log into the game first. If you do not have a game account, you will need to register for one. We look forward to your next visit! CLICK HERE
Thread Status:
Not open for further replies.
  1. Hello if anyone who's favorite ship is the G-Champion like it is mine you will maybe realize that some of the designs of the G-Champion in 3D are not actually the G-Champion but a reskin of the regular goliath.

    In 2D mode this issue does not exist, they are G-Champion designs in 2D.

    I normally don't notice because I usually play 2D for performance when I fly the G-Champion but I just realized that when I switched to 3D for the first time & used one of the G-Champion skins.

    I was wondering if Darkorbit can amend this issue and make the designs for the G-Champion proper & not the regular goliath.

    I would provide screenshots but I don't know how.

    EDIT: This issue also applies to Tyrannos G-Champion
     
  2. MRR

    MRR User

    Upload screenshots at Imgur.com and post link here.
     
  3. That would be because the skins were designed before the release of the G-Champion design/ship.
    Maybe they haven't fixed it up for 3D yet :rolleyes:
     
  4. Mod-Rogue

    Mod-Rogue User

    Hello †βŁΔÇЌ†ĐΣǍŦĦ†NWO

    Can you please send some pictures so i can report it higher up ? :)

    You can either use imgur or Gyazo :)

    looking forward to hearing from you :)

    Regards Rogue
     
  5. OK so here is the G-Champion in 2D, which is correct.

    2D G-Champion:
    Regular: https://imgur.com/a/DeQehBy
    Tyrannos: https://imgur.com/a/75vp0PE

    You can see that they both have the same design, especially around the main hull area & that the little fang things in the front are rounded out, and the back area is flat with small wings.

    Now for 3D the Base G-Champion design is pretty much the exact same as the 2D designs listed above, however the Tyrannos G-Champion in 3D resembles the regular Goliath ship, I also noticed this is the same with the Dusklight G-Champion in that it is the Goliath design not Champion.

    As far as I can tell, the Football(Soccer) European National designs are G-Champion, while the American one is not(but that's OK the American one is supposed to be regular goliath). I don't have the European Nation designs but I'm sure there are images out there

    3D G-Champion:
    Base G-Champion: https://imgur.com/a/aUb0p2l
    German G-Champion: https://imgur.com/a/Qd3e27a
    Tyrannos G-Champion: https://imgur.com/a/pys6U38

    Regular Goliath: https://imgur.com/a/Vh39ILg

    (side note: I don't have the European G-Champ designs but that's the best image I can find in 3D.)

    As you can see, both the G-Champion Tyrannos & Regular Goliath are both the same exact ship, while it is hard to tell from a distance, you can see because the G-Champion Tyrannos & the Regular Goliath's wings on the back are completely leveled upwards with no bottom base, & the fang areas towards the front are slim.

    In contrast, the G-Champion has a more broad front fang things & it has a base plate on it's rear where the wings sit on top of, & the wings are smaller on this ship.
     
  6. Mod-Rogue

    Mod-Rogue User

  7. Mod-Rogue

    Mod-Rogue User

    Closing Thread … It has been reported

    Thank you for your time and effort

    Regards Rogue
     
Thread Status:
Not open for further replies.