[GI] skylab

my skylab is bugged the terbium does not load and a visual bug that is is loading was wondering if any mod can solve please.

http://prntscr.com/bhzdx1

id 160137480
server : usa 3 east coast

 

It is most likely your skylab set up your prometid, duranium and promerium collectors are at level 3 and 4 your terbium collector is only level 2 and your endurium and prometium collectors are at level 3. You will need to deactivate your prometid, duranium and promerium collectors and allow your terbuim collector to collect once you have enough ore to upgrade a level upgrade then upgrade your basic and solar modules. you need to keep your solar basic and storage modules at least 1 level above your prometium, endurium and duranium collectors and keep your collectors at least one level above your refinery modules.

 

It is recommended to keep the Duranium and Prometid 3 levels behind the collectors and the Basic 1 level above the Solar, and Storage which is recommended to be started before starting the collectors. You will notice you are using more terbium than you are collecting. If you do not want to turn off the Prometid Refinery then buy the 12 Uridium robots for the Terbium Collector and let it run for the 48 hours before upgrading anything else.

Recommended start procedure for upgrading the Skylab;

Seprom should be started when Promerium is going up to level 2
Promerium and Xenomite get started with the Duranium and Prometid going up to level 2
Duranium and Prometid get started when the collectors are going to level 3
The Collectors get started with the Solar and Storage going up to level 2
Solar and Storage get started after Base is level 2 and going to level 3

When you have everything at the above levels and get ready to do the next upgrade you want to start the Basic, Solar, and Storage when you have enough materials and credits to do so, start the seprom again when enough materials and credits, Promerium and Xeno (usually in time to be done before the Seprom is done), start the Duranium and Prometid to coincide with the Promerium going active again, the start the Collectors to coincide with the Duranium and Prometid coming up. This allows everything to be down and then all running at the same time. If they are running at the above levels you will be able to continue this process until the Collectors hit level 20, at this point you will be starting the Duranium and Prometid as Promerium and Seprom are going to start taking way too long to have to wait for them to do the other upgrades.

 

julio12530, The above answers are correct. Your refineries are outpacing your collectors. Turn them off until you have the collectors level above that of your refineries.
So you have any further questions on this topic or may we close?

Best regards,
.-Raijin-.